<Type Name="AttrList" FullName="Pango.AttrList">
  <TypeSignature Language="C#" Value="public class AttrList : GLib.Opaque, IWrapper" Maintainer="auto" />
  <AssemblyInfo>
    <AssemblyName>pango-sharp</AssemblyName>
    <AssemblyPublicKey>
    </AssemblyPublicKey>
    <AssemblyVersion>0.0.0.0</AssemblyVersion>
    <AssemblyCulture>neutral</AssemblyCulture>
    <Attributes />
  </AssemblyInfo>
  <ThreadSafetyStatement>Gtk# is thread aware, but not thread safe; See the <link location="node:gtk-sharp/programming/threads">Gtk# Thread Programming</link> for details.</ThreadSafetyStatement>
  <Docs>
    <summary>Represents a list of attributes that apply to a section of text.</summary>
    <remarks>The attributes are, in general, allowed to overlap in an arbitrary fashion, however, if the attributes are manipulated only through <see cref="M:Pango.AttrList.Change()" />, the overlap between properties will meet stricter criteria.
<para>Since the <see cref="T:Pango.AttrList" /> is stored as a linear list, it is not suitable for storing attributes for large amounts of text. In general, you should not use a single <see cref="T:Pango.AttrList" /> for more than one paragraph of text.
</para></remarks>
  </Docs>
  <Base>
    <BaseTypeName>GLib.Opaque</BaseTypeName>
  </Base>
  <Interfaces>
    <Interface>
      <InterfaceName>GLib.IWrapper</InterfaceName>
    </Interface>
  </Interfaces>
  <Attributes />
  <Members>
    <Member MemberName="Copy">
      <MemberSignature Language="C#" Value="public Pango.AttrList Copy ();" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>Pango.AttrList</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Copy list and return an identical, new list.</summary>
        <returns>a new <see cref="T:Pango.AttrList" /></returns>
        <remarks />
      </Docs>
    </Member>
    <Member MemberName="Change">
      <MemberSignature Language="C#" Value="public void Change (Pango.Attribute attr);" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="attr" Type="Pango.Attribute" />
      </Parameters>
      <Docs>
        <summary>Insert the given attribute into the list.</summary>
        <param name="attr">a <see cref="T:Pango.Attribute" /></param>
        <remarks>It will replace any attributes of the same type on that segment and be merged with any adjoining attributes that are identical.  
<block subset="none" type="note">
            <para>This function is slower than <see cref="M:Pango.AttrList.Insert()" /> for creating a attribute list in order (potentially much slower for large lists). However, <see cref="M:Pango.AttrList.Insert()" /> is not suitable for continually changing a set of attributes since it never removes or combines existing attributes.
  </para>
          </block></remarks>
      </Docs>
    </Member>
    <Member MemberName="InsertBefore">
      <MemberSignature Language="C#" Value="public void InsertBefore (Pango.Attribute attr);" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="attr" Type="Pango.Attribute" />
      </Parameters>
      <Docs>
        <summary>Insert the given attribute into the list.</summary>
        <param name="attr"> the attribute to insert.</param>
        <remarks>It will be inserted before all other attributes with a matching start_index.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Unref">
      <MemberSignature Language="C#" Value="public void Unref ();" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Decrease the reference count of the given attribute list by one.</summary>
        <remarks>If the result is zero, free the attribute list and the attributes it contains.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Splice">
      <MemberSignature Language="C#" Value="public void Splice (Pango.AttrList other, int pos, int len);" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="other" Type="Pango.AttrList" />
        <Parameter Name="pos" Type="System.Int32" />
        <Parameter Name="len" Type="System.Int32" />
      </Parameters>
      <Docs>
        <summary>This function splices attribute list <paramref name="other" /> into list.</summary>
        <param name="other">another <see cref="T:Pango.AttrList" /></param>
        <param name="pos"> the position at which to insert <paramref name="other" /></param>
        <param name="len">the length of the spliced segment.</param>
        <remarks>This operation is equivalent to stretching every attribute applies at position <paramref name="pos" /> in list by an amount <paramref name="len" />, and then calling <see cref="M:Pango.AttrList.Change()" /> with a copy of each attributes in other in sequence (offset in position by <paramref name="pos" />).
This operation proves useful for, for instance, inserting a pre-edit string in the middle of an edit buffer.</remarks>
      </Docs>
    </Member>
    <Member MemberName="Ref">
      <MemberSignature Language="C#" Value="public void Ref ();" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Increase the reference count of the given attribute list by one.</summary>
        <remarks />
      </Docs>
    </Member>
    <Member MemberName="Insert">
      <MemberSignature Language="C#" Value="public void Insert (Pango.Attribute attr);" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="attr" Type="Pango.Attribute" />
      </Parameters>
      <Docs>
        <summary>Insert the given attribute to the list</summary>
        <param name="attr"> the attribute to insert.</param>
        <remarks>It will be inserted after all other attributes with a matching start_index.</remarks>
      </Docs>
    </Member>
    <Member MemberName=".ctor">
      <MemberSignature Language="C#" Value="public AttrList (IntPtr raw);" />
      <MemberType>Constructor</MemberType>
      <ReturnValue />
      <Parameters>
        <Parameter Name="raw" Type="System.IntPtr" />
      </Parameters>
      <Docs>
        <summary>Internal constructor</summary>
        <param name="raw">Pointer to the C object.</param>
        <returns>An instance of AttrList, wrapping the C object.</returns>
        <remarks>
          <para>This is an internal constructor, and should not be used by user code.</para>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName=".ctor">
      <MemberSignature Language="C#" Value="public AttrList ();" />
      <MemberType>Constructor</MemberType>
      <ReturnValue />
      <Parameters />
      <Docs>
        <summary>Default constructor</summary>
        <returns>a new <see cref="T:Pango.AttrList" /></returns>
        <remarks />
      </Docs>
    </Member>
    <Member MemberName="Iterator">
      <MemberSignature Language="C#" Value="public Pango.AttrIterator Iterator { get; };" />
      <MemberType>Property</MemberType>
      <ReturnValue>
        <ReturnType>Pango.AttrIterator</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Create a iterator initialized to the beginning of the list.</summary>
        <returns>a new <see cref="T:Pango.AttrIterator" /></returns>
        <remarks />
      </Docs>
    </Member>
    <Member MemberName="Filter">
      <MemberSignature Language="C#" Value="public Pango.AttrList Filter (Pango.AttrFilterFunc func);" />
      <MemberType>Method</MemberType>
      <ReturnValue>
        <ReturnType>Pango.AttrList</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="func" Type="Pango.AttrFilterFunc" />
      </Parameters>
      <Docs>
        <summary>Given a callback function, removes any elements of list for which <paramref name="func" /> returns <see langword="true" /> and inserts them into a new list.</summary>
        <param name="func">a <see cref="T:Pango.AttrFilterFunc" /></param>
        <returns>a <see cref="T:Pango.AttrList" /></returns>
        <remarks />
      </Docs>
    </Member>
    <Member MemberName="GType">
      <MemberSignature Language="C#" Value="public static GLib.GType GType { get; };" />
      <MemberType>Property</MemberType>
      <ReturnValue>
        <ReturnType>GLib.GType</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>GType Property.</summary>
        <returns>a <see cref="T:GLib.GType" /></returns>
        <remarks>Returns the native <see cref="T:GLib.GType" /> value for <see cref="T:Pango.AttrList" />.</remarks>
      </Docs>
    </Member>
  </Members>
</Type>